Our Products

HOLON SEIKO
e-PELLETER ,c-PELLETER

Feature

Air-coolong Type Pellet Production Machine (for stand-alone use)

Epochal

This is a pellet producing machine for molding factories.It cuts the melted strands that are pushed out by the super short screw extrusion machine into pellets.This machine responds to unsatisfactory molding with granulating materials, especially engineering plastic, and produces pellets that are the same shape as those made out of raw materials. Additionally, its air-cooling system needs no preliminary drying.

Economic

This machine’s simple design makes its price reasonable.Its compact design allows for placement alongside the molding machine as one machine “CUTandPELLETER” that is integrated with the granulator (COMPACK).

Easy

This machine’s simple design makes its price reasonable.Its compact design allows for placement alongside the molding machine as one machine “CUTandPELLETER” that is integrated with the granulator (COMPACK).


Air-cooling Type Pellet Production Machine (for production line (in-line) use)

Compact

This compct design allows easy installation alongside your molding machine.We propose replacement of the existing granulator by this machie.Also it can be linked to a hopper loader when the vacuum collector device (optional accessory) attached.

Built-in Cutter

Now e・Pelleter equips a granulating cutter inside.
After loading of runners expelled from the moldig machine, runners get granulated by the cutters and melted with the screw to form recycled pellets.
This system allows an instant pelletization of fixed runners following the molding cycles.

Cost Saving

We simplified the granulating machanism and reduced the numbers of parts significantly.Around 40% cost reduction than previous model (CP4-250) has been achived.

Air-cooling Type Pellet Production Machine (for production line (in-line) use)


Compact

This compct design allows easy installation alongside your molding machine.
We propose replacement of the existing granulator by this machie.
Also it can be linked to a hopper loader when the vacuum collector device (optional accessory) attached.

Built-in Cutter

Now e Pelleter equips a granulating cutter inside.After loading of runners expelled from the moldig machine, runners get granulated by the cutters and melted with the screw to form recycled pellets.This system allows an instant pelletization of fixed runners following the molding cycles.

Cost Saving

We simplified the granulating machanism and reduced the numbers of parts significantly.Around 40% cost reduction than previous model (CP4-250) has been achived.

Pellet Production Machine with Blender

New machine with fixed quantity mixing arrived.

Fixed quantity mixing equipment installed CPB200 has been newly developed.
This can perform operations from granulating to pelletization and mixing by only this one machine.It mixes recycled pellet and virgin materials at a certain fixed rate.
All an operator has to do is to load the materials. This machine will do the rest of works automatically.

Specification

 Air-cooling Type Pellet Production Machine
(for stand-alone use) 
Air-cooling Type Pellet Production Machine with Cutter
(for production line (in-line) use)
 ― ―  ―With fixed quantity mixing 
EP50-4EP50-8  CP200-4CPB200-4
Power Three-Phase AC 200V (50/60Hz)  Three-Phase AC 200V (50/60Hz)
Motor Capacity
(kw)
0.5   0.5 0.6
Heater Capacity
(kw)
3.8 3.9  3.9
NOZZLE ID
(mm)
φ2 , φ2.5(Standard) , φ3  φ2 , φ2.5(Standard) , φ3
Number of Nozzle 4 4
Length of Pellet
(mm)
~5  ~5
Air Consumption
(L/min)
~100 (Required 0.75KW compressor)  ~100 (Required 0.75KW compressor)
Weight
(kg)
150 170 200
 Runner Size (L・Dmm) ~200 ・ ~8 

 

Back
Ask for more information